Review a slender smartphone "MODE1 GRIP" for 22,000 yen.Taller than iPhone 13 mini, it is outstanding to hold

One that shines with a new concept called "GRIP"

 Speaking of the MODE1 series, many of the models released so far have been designed as "racing cars" as a big feature of "racing car".

 Like the previous models, the back design of the carbon look, which is a racing that seems to be a company that is also focusing on motor sports, is inherited, but the major feature of MODE1 Grip is, as the name suggests, "Grip", that is, grip.There is a slim body width that is easy.

 The main body width of Mode1 Grip is about 56mm.Even in the iPhone SE 2nd generation, which is said to be relatively compact and easy to hold on the current smartphone, 67.3mm, the latest iPhone 13 mini 64.You can see that the width is quite narrow because it is 2mm.

 Considering that the width of the feature phone was about 50mm, the impression of holding Mode1 Grip in hand is close when holding the feature phone.

 Instead of grip ease, the basic performance is moderate for the compact body size.

 The SOC is a normal performance given that it is a cheap SIM -free smartphone of 22,000 yen, with MediaTek's Helio P70, 4GB of memory, 64GB of storage.

【表】Mode1 GRIPの主なスペック
OSAndroid 11
SoCMediaTek Helio P70
メモリ4GB
ストレージ64GB
ディスプレイサイズ5型液晶
ディスプレイ解像度1,440×576ドット
リアカメラ約4,800万画素+約800万画素(広角)
フロントカメラ約2,500万画素
SIMカードNano SIMカード×2(DSDV対応)
ワイヤレスWi-Fi 5(IEEE 802.11ac)、Bluetooth 4.2 LE
インターフェイスUSB Type-C
外部メモリーカードmicroSDカード(最大256GBまで)
FeliCa×
NFCNFC TypeA/B対応
防水・防塵×
ワイヤレス充電Qi 5W対応
対応バンド4G:B1/B3/B8/B19/B26/B28b/B413G:B1/B6/B8/B192G:850MHz/900MHz/1,800MHz/1,900MHz
本体サイズ約56×138×10mm(幅×奥行き×高さ)
重量約140g

 As the concept of "GRIP", the body width is slim, and the display is a 5 -inch display, but the resolution is "1,440 x 576 dots", which has a smaller pixel than other smartphones.The interesting thing is that the aspect ratio is the cinemascope ratio.

 Although the video viewing that spreads to the full screen, there is a feeling of immersion, and even in everyday use, it is long vertically and has a large amount of information, so it is unlikely that the resolution and information are insufficient.

 As I wrote so far, in addition to the very slim body width and vertical display, the back of the common carbon look as the MODE1 series, and the power buttons colored red are eye -catching.。

 Biological authentication is compatible with fingerprint authentication, and the fingerprint authentication center is located on the right side of the main unit, where the thumb hits when you hold it.The authentication accuracy is high, the body size is small and easy to hold, so it is possible to unlock the screen immediately without retrofitting from the pocket.

 The SIM card slot can be attached to two nano SIM cards, and Mode1 Grip also supports DSDV.It will be exclusively used with the second Nano SIM card, but you can also use a microSD card.

 The accessories are manuals, SIM pins, USB Type-A to C cables, and dedicated hard type clear cases.

 Since the clear case has a large side, the concept is not sacrificed even when attached, and I felt it was a dedicated case that was firmly protected mainly in squares that were easily damaged.

Related Articles